View ZL60009_1107745.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ZL60009 PIN/Preamp 1300 nm-1550 nm
Data Sheet
June 2004
Ordering Information ZL60009/TBD TO-46 with lens
-40C to +85C
Description
This optical receiver is a 3.3 V device which contains a PIN photodiode and a low noise transimpedance amplifier assembled in a TO-46 package. It is designed for OC-3/STM-1 operation. Its optical system is designed for single mode fiber as well as for multi mode fiber with a core diameter up to 62.5 m. Reliability Assurance based on Telcordia GR-468CORE.
Features
* * * * * * Data rate up to 200 Mbps 1310 - 1550 nm PIN TO-46 Assembly TIA with AGC Single 3.3 V supply Low power consumption
VCC
Applications
* * * * Sonet OC-3 SDH STM-1 ATM 155 Mbps FDDI, Ethernet
Data
Data
GND
Figure 2 - Functional Schematic
Bottom View
Figure 1 - Pin Diagram
1
Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2003 - 2004, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60009
Optical and Electrical Characteristics Parameter Responsivity, differential Output Voltage amplified, differential Bandwidth (3 dBel) Optical Saturation level, (average) Noise-Equivalent Power Dynamic Range Sensitivity (BER 10-9 ) S RO PD IDD NEP Symbol R Min. 13 Typ. 39 270 140 0 3 -47 40 -37 40 72 22 -36 100 115 32 Max. Unit kV/W mVpp MHz dBm dBm dB dBm mW mA
Data Sheet
Test Condition =1310 nm RL = 100 , Note 1 RL = 100 , Note 2 Pf = 10 W, RL=100 =1310 nm
ER = , Note 3
VO
fc
=1310 nm, Note 4 =1310 nm
ER = , Note 3, 5
Output Resistance (single) Power Dissipation Power Supply Current
Operating Conditions: 25C Case Temperature/3.3 V Supply Voltage/Fiber: Single-mode to multi-mode 62.5/125 m fiber
Note 1: Note 2: Note 3: Note 4: Note 5: P f = 2W Peak-Peak power at 10 MHz 50% duty cycle P f =100W Peak-Peak average Power at 10 MHz 50% duty cycle Measured at 10-9BER with a 223 -1 PRBS at 155 Mbps Measured with STM-1 filter on electrical output i.e. 116 MHz Penalty at 10-10 BER equals 0.26dB
Absolute Maximum Ratings Parameter Supply Voltage Storage Temperature Symbol VCC Tstg Min. -0.5 -55 Max. 4.5 125 Unit V C
Recommended Operating Conditions Parameter Supply Voltage Output Differential Load, Note 6 Operating Temperature
Note 6:
Symbol VCC RL Top
Min. 3 100 -40
Typ. 3.3 1000
Max. 3.6
Unit V
85
C
The typical value corresponds to the load prevented by a following limiting amplifier.
2
Zarlink Semiconductor Inc.
ZL60009
Typical Responsivity
Data Sheet
Fiber Core/Cladding Diameter Numerical Aperture Wavelength 10/125 m, NA=0.11 39 kV/W 47 kV/W 50/125 m, NA=0.20 39 kV/W 47 kV/W 62.5/125 m, NA=0.275 39 kV/W 47 kV/W
Differential responsivity Differential responsivity
1310 nm 1550 nm
z-Axial Displacement of fiber (mm) at r=opt, relative TO-46 lens
Figure 3 - Typical Responsivity Versus Axial Displacement for a Multimode Fiber
R-Radial Displacement of fiber (m) at z=opt
Figure 4 - Typical Responsivity Versus Radial Displacement for a Multimode Fiber
3
Zarlink Semiconductor Inc.
ZL60009
% 100
Data Sheet
Relative Responsivity
50
0
800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 mm
Wavelength
Figure 5 - Responsivity Versus Wavelength of Coupled Input Power
Application Guidelines
ESD Handling The receiver is sensitive to electrostatic discharges. When handling the device, precaution for ESD sensitive devices should be taken. These precautions include use of ESD protected work area with wrist straps, controlled work benches, floors etc. Power Supply Filter Power Supply decoupling capacitors are recommended for optimal performance of the receiver. A filter is recommended to minimise power supply noise. see Figure 7.
L Host VCC PIN / Preamp 10 H C 0.1 F C 10nF
Figure 6 - Recommended Power Supply Filter
4
Zarlink Semiconductor Inc.
ZL60009
Data Outputs
Data Sheet
Outputs, Data and Data, need to be AC-coupled according to Figure 8. The capacitor determines the low-frequency cut-off for the system. For improved sensitivity the optional filter capacitor CF should be chosen to constitute a 0.75*bit rate BW filter.
ZL60009 output
MC2045
C CF 10nF C 10nF
Figure 7 - Required coupling and filter capacitors
5
Zarlink Semiconductor Inc.
BOTTOM VIEW ( 10 : 1 )
3,8
SIDE VIEW
13,460,76
2,54
n1,17 + 0,05 (3x) n0,45 + 0,04 (4x) -
0,6 0,03 * Brazed
0
R2,7 45
n1,02 max
n4,7
3, 6
1, 02
0,33 max Lens n1.50.05 R0,4 max
NOTES:1. All dimensions in mm. 2. General tol. ISO-2768-mK. 3. Coating: Case: Ni 1,5-2,5 m. Header: Ni min 0,5 m / Au min 1,5 m.
* 0,25 max glass overmould (3x)
(c) Zarlink Semiconductor 2002. All rights reserved.
Package code Previous package codes
Drawing type
ISSUE ACN DATE
1
JS0 04078R1A
TB
Package drawing, TO-46 with lens Title
22-MAR-03
APPRD. TD/BE
JS004078
For more information about all Zarlink products visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively "Zarlink") is believed to be reliable. However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink. This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink's conditions of sale which are available on request.
Purchase of Zarlink's I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system conforms to the I2C Standard Specification as defined by Philips. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE

▲Up To Search▲

Price & Availability of ZL60009

	To Download ZL60009 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .